Tuicemens

Pages: [1]

Author Topic: Pro IP Camera  (Read 115 times)

Tuicemen

  • Administrator
  • Hero Member
  • *****
  • Helpful Rating: 26
  • Offline Offline
  • Posts: 3699
  • Making Home Automation Fun!
    • Tuicemen.com
Pro IP Camera
« on: April 27, 2019, 06:05:06 PM »

The generic Camera is fine for simple viewing however I required more.
This includes the options to switch to 4 different Camera pre-sets (if the camera is capable of that) and allows one to take a snapshot and email it to a recipient while viewing.
Also added is the option to display in portrait view.
Hovering your mouse over a icon will display info about what it does
This includes a new widget with the pre-set buttons and snapshot button displaying at the top as well as the options available in the generic camera program.
I may add more options to this as there is still room for at least 2 more buttons in the header field.
Additional options may be added in the future.
I've tested this with Airsights xx69, xx79 , Foscam mpeg cameras and Easyn mpeg cameras I do have the pre-set codes for the older Airsight modles but since I don't have one I couldn't test one.

Install instructions:
download the ProIpcamera.zip then unzip it inside there is the 1025-Pro_Ip_Camera.hgx program install it as any other program.
Also there is another zip file inside (tuicemen_media_procamera.zip) don't unzip it that is the widget, install it as you would any other widget. ;)
« Last Edit: May 08, 2019, 03:46:32 PM by Tuicemen »
Logged
Get the inside scoop and member perks in the
Members Only Section!

Please don't email me Automation questions 
The forum is for that!

Tuicemen

  • Administrator
  • Hero Member
  • *****
  • Helpful Rating: 26
  • Offline Offline
  • Posts: 3699
  • Making Home Automation Fun!
    • Tuicemen.com
Re: Pro IP Camera
« Reply #1 on: May 08, 2019, 11:42:59 AM »

For users wishing to utilize the pre-set functions of the Pro IP Camera addon. You need to set the pre-sets up from the pan and tilt IP cameras web UI first.
Mpeg IP camera  pre-set codes
if you have a foscam or simular type mpeg IP camera  then here are the codes for those cameras.
replace the bold type text with your info
Code: [Select]
http://IP:PORT/decoder_control.cgi?user=NAME&pwd=PASSWORD&command=NUMReplace NUM with corresponding pre-set.
pre-set#1=31
pre-set#2=33
pre-set#3=35
pre-set#4=37

X10 Airsight XX69 & XX79 code
again change the Bold values for your info
Code: [Select]
http://IP:PORT/cgi-bin/decoder_control.cgi?&type=2&cmd=NUM&user=NAME&pwd=PASSWORDReplace NUM with corresponding pre-set.
pre-set#1=0
pre-set#2=1
pre-set#3=2
pre-set#4=3
X10 Airsight XX59 and possibly older units
Code: [Select]
http://IP:PORT/decoder_control.cgi?command=NUM&user=NAME&pwd=PASSWORDReplace bold text with your info & replace NUM with corresponding pre-set.
pre-set#1=31
pre-set#2=33
pre-set#3=35
pre-set#4=37
If your camera uses different codes please post them here so others may benefit from the info.
If your cameras use the same code as ones I've posted be sure to state which codes work with the brand you have. (Chr)
« Last Edit: May 08, 2019, 11:44:35 AM by Tuicemen »
Logged
Get the inside scoop and member perks in the
Members Only Section!

Please don't email me Automation questions 
The forum is for that!

Tuicemen

  • Administrator
  • Hero Member
  • *****
  • Helpful Rating: 26
  • Offline Offline
  • Posts: 3699
  • Making Home Automation Fun!
    • Tuicemen.com
Re: Pro IP Camera
« Reply #2 on: May 08, 2019, 03:51:14 PM »

I just posted a new Pro IP camera  program and widget.
This adds,
1: the ability to jump to the IP cameras web UI to set camera options and pre-sets. Click on the definition (camera#)
2:option for web UI address in the program settings
3:blinking icons once clicked on to indicated the command was sent in case HG pop up fails to show
 (Chr)
Logged
Get the inside scoop and member perks in the
Members Only Section!

Please don't email me Automation questions 
The forum is for that!
Pages: [1]
 

succession-resounding