Tuicemens

Voice Assistants => Alex10 (X10 With Amazon's Alexa) => Alexa => Alex10 Help (support) => Topic started by: mikeythemars on November 13, 2018, 09:50:47 PM

Title: Testing HA Bridge to see if it is properly controlling devices
Post by: mikeythemars on November 13, 2018, 09:50:47 PM
This may come off as a very basic question, but how does one get into HA Bridge to see if it can directly control devices?   I know there is a file in the Alex10 folder labeled HA Bridge; can that be opened directly and if so, is there a way to either link it to the device files one has set up, with some sort of platform that allows you to do on/off and dim/brighten tests on devices?   
Title: Re: Testing HA Bridge to see if it is properly controlling devices
Post by: Tuicemen on November 14, 2018, 06:31:31 AM
Ha-bridge runs as a server. If you open your browser to http://localhost the web interface should display allowing you to test things
Title: Re: Testing HA Bridge to see if it is properly controlling devices
Post by: mikeythemars on November 14, 2018, 11:26:45 AM
Ha-bridge runs as a server. If you open your browser to http://localhost the web interface should display allowing you to test things

When I try to open http://localhost, I get an error message stating "localhost refused to connect."   
Title: Re: Testing HA Bridge to see if it is properly controlling devices
Post by: Tuicemen on November 15, 2018, 10:00:29 AM
If you changed the defalt port what I suggested wont work. In your browser type the pc IP and port eg.
http://192.168.1.4:8999